The proliner navi3 is equipped with rotating brushes at the front and rear. The bristles of different lengths also clean recesses such as joints. Four additional corner brushes effectively remove dirt and deposits from corners and along edges. The result is a thoroughly cleaned pool.

The cleaning performance is enhanced by the negative pressure of over 20 kg generated during operation - due to the optimised water flow - in combination with the friction of the water drawn in.

In automatic mode, the proliner navi3 cleans the pool from start to finish. It safely bypasses obstacles such as a water mushroom without winding up the cable. It switches before diving pits and, if desired, only a defined sector of the pool can be cleaned. After work, the device switches off automatically. The proliner navi3 cleans an Olympic pool in 2,5 hours.

If your pool complex has several pools, you have the option of storing up to 4 different programs. This means that each pool has its own ideal program and is cleaned optimally.

You can find out more about the automatic of the Mariner 3S pool floor cleaners here.

Sophisticated water routing guarantees effective cleaning performance across the entire width of the appliance. The dirty water is first channelled through the filter and only then through the pump. This protects the pump from clogging and damage. Thanks to flow optimisation, no dirt is whirled up that could escape cleaning.

6 lamella filter cartridges are designed as a filter area up to 6 m². Only with a large filter surface is it possible to filter out large dirt quantities. The filter cartridges are located in a filter box. This practical container can be removed from the top of the unit and carried to the cleaning area without loss of dirt. There the filters and the box are cleaned quickly and easily.

The filter cleaning is quickest and most effective with the puromat. You can find out more about the filter cleaning aids here. 

To ensure that the filter cartridges dry well, do not place them in the filter box or remove the lid. We have chosen a high-quality material for the filters so that you can use them for up to two years with good care.

Thanks to its robust transport trolley with integrated cable drum, the proliner navi3 is also easily manoeuvrable on land and can be neatly stored away when it is not in use. The robot can be driven in the pool with operating drives. Using the integrated function of re-emergence, it moves itself from the pool ground back on the water surface, where it can be simply driven out of the pool by using the drives.

• Cleaning device with integrated filter box and six lamellar filter cartridges
• Transport trolley with cable drum
• Remote control with functions such as operating hours and cycle counter, menu selection and parameter settings
• Radio remote control
• Commissioning and on-site training for relevant staff
• Tool kit

Do you have a large pool but not so much dirt? Then choose the small filters for your proliner navi3! 

With the small filters, your proliner navi3 can no longer surface automatically, but as you don't need such a large filter surface, your proliner navi3 is also a little lighter.

Switchover aid

Extensions for a reliable change of direction for standing steps or round transitions from the floor to the wall.

Ramp

For bridging a low-lying water channel.

Basic sensor

For lane-by-lane cleaning in rectangular basins over short distances.

High tech sensor

Enables lane-by-lane cleaning in free-form pools.

Protective cover

Protects the electronics even in heavy rain.

Roller for liner

The roller for liner ensures that the pool liner remains on the floor and is not sucked in.